• 1

Wireless bridge supplier

Short Description:

Pure 5GHz frequency band, less interference, wireless transmission distance up to 3 kilometers;

900M wireless with built-in high gain 12dBi dual polarization antenna;

The shell adopts an IP65 protection level design;

Support web and cloud management.


Product Detail

Product Tags

◎ product description

The CF-CPE900K is a high-performance enterprise-class outdoor network bridge product that supports 5G full-frequency band and uses 802.11A/N/AN/AC technology. Unique digital tube matching technology, no computer configuration, easily complete point to point, point to-point (within 8 points) equipment matching. Gigabit network interface, 5G 802.11AN MIMO technology wireless processing speed up to 900Mbps. Flexible power supply mode, support 24V POE network cable power supply and 12V 1A DC local power supply, the network cable power supply distance can reach 80 meters (related to the network cable material). Using outdoor IP65 windproof, rainy, dustproof, sunscreen protection grade shell design, easy to adapt to a variety of harsh outdoor environment. Built-in 14dBi double intensified plate antenna, easy and quick to install. With high performance, high gain, high reception sensitivity, high bandwidth and other characteristics, greatly enhance the wireless transmission performance and stability, widely used in medium and short distance video transmission and data transmission.

◎ Product hardware

The 900Mbps high-speed rates and NAT high-conversion rates
CF-CPE900K uses 802.11A/N/AN/AC technology to provide a wireless access speed of up to 900Mbps, which is about 3 times that of 802.11/b/g/n products in the same environment, and the conversion rate of NAT is> 93%, realizing a faster download and upload speed through the external network, and online surfing at will.
Transparent, highly efficient and energy-efficient
The product supports IEEE802.3az, which can enter the low-power mode in a transceiver without a sending frame. When a new frame arrives, the transceiver will return to the active mode in several microseconds, thus achieving an almost transparent energy saving to the upper layer of the protocol. The energy consumption can be automatically adjusted according to the actual flow of the port, which can be quickly converted between full-speed operation and low-power idle mode, saving 30% of the power consumption for users, and greatly saving the operating cost.
Beam forming technology
Through the wave speed forming technology, can automatically adjust the size of the signal weighted value of each array in the array, the antenna direction of zero alignment interference direction and suppress the interference, enhance the system useful signal detection ability, optimize antenna direction, and can effectively track the useful signal, suppress and eliminate interference and noise, even in the close distribution of multiple interference and the same frequency, can successfully suppress the interference.
The pairing is simple and efficient
Without network expertise, no computer operation, the point-to-point, point-to-point, point-to-point (up to the same value.
Support for 5G full frequency band
Supported channels are 36,40,44,48,52,56,60,64,149,153,157,161,182,186,190,194 special channels are not on by default and can be turned on when needed.

◎ product technical indicators


The main chip
MTK7620DA + 7612E Package 64M RAM
Flash Memory 8MB Flash
size 260*90*37mm
antenna 5.8G(802.11a/n/an/ac)2T2R
antenna gain Built-in bipolarization high-gain 14dBi directional plate-shaped antenna
speed 5.8g 900Mbps
port 110 / 100 / 1000Mbps RJ45 port, 110 / 100Mbps RJ45 interface
source Support DC 12V 1A, POE 24V 1A non-standard power supply
push-button 1 * Digital switch, short press the digital tube display value plus one

1 * Reset button, and press it for 5 seconds to restore the factory settings

1 * Dial code switch, left and right switch main and slave mode

transmission distance 2KM
Work frequency band 802.11a/n/an/ac: 5.1GHz~5.8GHz (China)
transmitting power
11a
r6_24,r36,r48,

23

r54

20

11AC VHT20
MCS0, MCS1_2, MCS3_4, MCS5, MCS6

23

MCS7

23

 

MCS8

20

MCS9

20

11AC VHT40
MCS0, MCS1_2, MCS3_4, MCS5, MCS6

23

MCS7

20

MCS8

20

MCS9

20

11AC VHT80
MCS0, MCS1_2, MCS3_4, MCS5, MCS6

23

MCS7

20

MCS8

20

MCS9

20

 

EVM 11n

MCS

Requirements are less than (dB)

Modulation

Coding rate

BPSK

1/2

-5

QPSK

1/2

-10

QPSK

3/4

-13

16QAM

1/2

-16

16QAM

3/4

-19

64QAM

2/3

-22

64QAM

3/4

-25

64QAM

5/6

-28

11ac

MCS

Requirements are less than (dB)

Modulation

Coding rate

BPSK

1/2

-5

QPSK

1/2

-10

QPSK

3/4

-13

16QAM

1/2

-16

16QAM

3/4

-19

64QAM

2/3

-22

64QAM

3/4

-25

64QAM

5/6

-27

256QAM

3/4

-30

256QAM

5/6

-32

 

EVM
5GHz

Symbol

Parameter

Rx(dBm)

802.11a

Srf

(OFDM)

1Rx chain

6Mbps

-88

54Mbps

-72

802.11ac

802.11ac VHT20

1 Stream(1x1)

MCS0

-84

MCS7

-67.5

MCS8

-64

2 Stream(2x2)

MCS0

-83

MCS7

-66.5

MCS8

-63

802.11ac VHT40

1 Stream(1x1)

MCS0

-82

MCS7

-65.5

MCS9

-58.5

2 Stream(2x2)

MCS0

-81

MCS7

-64.5

MCS9

-57.5

802.11ac VHT80

1 Stream(1x1)

MCS0

-79

MCS7

-62

MCS9

-55.5

2 Stream(2x2)

MCS0

-78

MCS7

-61

MCS9

-54.5

 

Support rate 802.11ac: 6.5Mbps-867Mbps

802.11n: 6.5Mbps and 300Mbps

Operating / storage temperature -Temperature: -30℃ ~ + 55℃ (working), -40℃ ~ + 70℃ (stored)

Humidity (non-condensation): 10%~90% (working), 5%~95% (storage)

classification of waterproof IP65
Signal indicator, 4 Bridge access point: the output power indicator lamp

 Below 25% (SIG1 often bright), 25%~50% (SIG1-SIG2 often bright), 50%~75% (SIG1-SIG3 often bright),

75%~100% (SIG1-SIG4 bright).

Bridge client: connect the signal strength indicator light

When the connection fails, when the connection is successful:

0~ -65dBm (SIG1-SIG4 often bright), -66- -75dBm (SIG1-SIG3 often bright), -76~ -85dBm (SIG1-SIG2 often bright), signal intensity below-86dBm (SIG1 often bright)

 
 LAN1 Gigabit network port status indicator: flashing during cable data transmission, going off when the cable is disconnected.  
   Wireless lamp: flashing when the bridge is running normally  
  Power indicator: power is on and off when power is off.  

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 2-port 10/100/1000M WDM 20km Plug-in Media Converter (single-mode single-fiber SC)B-end

      2-port 10/100/1000M WDM 20km Plug-in Media Conv...

      2-port 10/100/1000M WDM 20km Card Media Converter (single-mode single-fiber SC)B-end Product Features: Introducing Revolutionary Optical Gigabit Transceivers and Optical Converters! Welcome to Huizhou Changfei Photoelectric Technology Co., Ltd., a well-known provider of cutting-edge transmission solutions and high-quality products. With rich R&D experience and impressive optoelectronic patent portfolio, we have won the trust and appreciation of more than 360 distributors and agents in ...

    • 16 port 100M Ethernet switch

      16 port 100M Ethernet switch

      Product Features: Supports the interconversion between 10Base-T and 100Base-TX; 16 10 / 100Base-T RJ45 ports; 10 / 100M rate adaptation, MDI / MDI-X adaptation, full / half-duplex adaptation; Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control. Optical links and electrical links have a complete connection / active status indicator light; All ports support no-blocking line speed forwarding, smoother transmission; Broadcast...

    • 6-port 10/100/1000M  Media Converter (Single-mode Dual-fiber SC)

      6-port 10/100/1000M Media Converter (Single-m...

      6-port 10/100/1000M Media Converter (Single-mode Dual-fiber SC) Product Features: Huizhou Changfei Optoelectronics Technology Co., Ltd. is a leading technology company focusing on high-performance communication equipment and launching compact fiber optic media converters. Designed with advanced features and cutting-edge technology, this product will revolutionize the way you experience the web. Our compact fiber optic media converters combine the power of a gigabit connection with a transm...

    • Ring network three-layer network pipe 40,000 trillion light 24 electricity Industrial Ethernet, and the switches

      Ring network three-layer network pipe 40,000 tr...

      ◎ product description Industrial Ethernet switch (industrial switch for short) is a kind of cost-effective networking equipment specially provided to meet the needs of flexible industrial applications. According to the actual demand of industrial control, the industrial switch solves the technical problems such as real-time communication, network availability performance and security. Compared with ordinary commercial switches, industrial switches are more demanding ...

    • 10-port 10/100/1000M  Media Converter (multi-mode Dual-fiber SC)

      10-port 10/100/1000M Media Converter (multi-m...

      10-port 10/100/1000M Media Converter (multi-mode Dual-fiber SC) Product Features: Let me introduce to you the cutting-edge product brought to you by Huizhou Changfei Optoelectronics Technology Co., Ltd. – Gigabit 8 optical 2 electrical multi-mode dual fiber. As an innovative high-tech enterprise, YOFC focuses on various communication equipment and network products. We specialize in 5G communications, fiber optic transceivers and network switches, providing you with versatile and reli...

    • 8-Port Plastic Shell Ethernet Switch

      8-Port Plastic Shell Ethernet Switch

      Product Features: ØSupports the interconversion between 10Base-T and 100Base-TX; Ø8 10 / 100Base-T RJ45 ports; Ø10 / 100M rate adaptation, MDI / MDI-X adaptation, full / half-duplex adaptation; ØSupport IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control. ØOptical links and electrical links have a complete connection / activity status indicator light; ØAll ports support no-blocking line speed forwarding, smoother transmission; ØBroadcast fi...